AllstarLink Hardware devices - Repeater // RadioLess

RadioLess Repeater Setup

5.)
URIxB - USB Radio Interface Order Page
http://www.uricables.com/
http://dmkeng.com/URI_Order_Page.htm
URI Box plugs into a Pi 3. + cables plugs into DR1X repeater .

The DR2X will not do MMDVM from what I understand.

The URI-X plugs into the USB of the raspberry Pi and just offers a DB25 pinout for interfacing instead of using a USB sound FOB as it is the sound FOB in essence.

Otherwise you could interface the FOB using the CT-167 cable which gives you the COR/COS, PTT, GND, Mic Hi, and RX audio

If you have a domestic or foreign amateur radio or GMRS license click the Add to Cart button below to receive a DISCOUNT. Important: please email your amateur radio call sign / license number along with your name and shipping address to us in order to qualify for this special offer. Also, please tell us a little about your application. We would like to help in any way we can
http://www.uricables.com/
http://dmkeng.com/URI_Order_Page.htm
URI Box plugs into a Pi 3. + cables plugs into DR1X repeater .
sales@dmkeng.com

1.)
Model RA-DR1X
http://www.masterscommunications.com/products/radio-adapter/radr1x.html

Description:
David Lowrence AL5X contacted me describing a modification he did to the RA-40 radio adapter to allow it to revert the Yaesu DR-1X to local control if something AllStar wise fails. If the Raspberry Pi or radio adapter fails, the DR-1X will revert to in-cabinet contol and continue to work. The DR-1X requires an open collector logic output of the correct logic direction in order to accomplish this. The modification requires one additional transistor than a conventional RA-40 has. The RA-DR1X is basically the RA-40 shown in Dave's web article built with the additional components shown in the article. Unlike Dave's modification, all logic components on the RA-DR1X are on the component side of the PC board. Only the EEPROM is mounted on the solder side, just like all our other radio adapters.

2.)

Yaesu DR-1X Fusion Repeater Project with a Pi 3 and RA-40 Control Interface Board

http://www.resonantfractals.org/Echolink-Cable/Repeaters.html

The RA-40 interface board was chosen and a Pi /3 computer as a best cost effective method, with a feature rich package already available.

3.)

MABEL DR-1X Control Board Kit

http://www.customcomms.net/products

Description:

The MABEL interface and software allows analog control of the Yaesu DR-1X repeater and access to the AllStar VOIP network with the Raspberry Pi3 and the HamVOIP ver. 1.5 release.

4.)

Modifying the Yaesu DR1 Repeater for use on Allstar

http://crompton.com/hamradio/DR1_Allstar_mod/

https://allstarlinknetwork.blogspot.com/