Allstarlink Remote Commands

 Remote Commands:

 1 - Recall Memory MM  (*000-*099) (Gets memory from rpt.conf)

 2 - Set VFO MMMMM*KKK*O   (Mhz digits, Khz digits, Offset)

 3 - Set Rx PL Tone HHH*D*

 4 - Set Tx PL Tone HHH*D* (Not currently implemented with DHE

     RBI-1)

 5 - Link Status (long)

 6 - Set operating mode M (FM, USB, LSB, AM, etc)

 100 - RX PL off (Default)

 101 - RX PL On

 102 - TX PL Off (Default)

 103 - TX PL On

 104 - Low Power

 105 - Med Power

 106 - Hi Power

 107 - Bump Down 20 Hz

 108 - Bump Down 100 Hz

 109 - Bump Down 500 Hz

 110 - Bump Up 20 Hz

 111 - Bump Up 100 Hz

 112 - Bump Up 500 Hz

 113 - Scan Down Slow

 114 - Scan Down Medium

 115 - Scan Down Fast

 116 - Scan Up Slow

 117 - Scan Up Medium

 118 - Scan Up Fast

 119 - Transmit allowing auto-tune

 140 - Link Status (brief)

200 thru 215 - (Send DTMF 0-9,*,#,A-D) (200=0, 201=1, 210=*, etc)