AllstarLink ILINK Commands

 ILINK Commands:

 1 - Disconnect specified link

 2 - Connect specified link -- monitor only

 3 - Connect specified link -- tranceive

 4 - Enter command mode on specified link

 5 - System status

 6 - Disconnect all links

 7 - Last Node to Key Up

 8 - Connect specified link -- local monitor only

 9 - Send Text Message (9,<destnodeno or 0 (for all)>,Message Text, etc.

 10 - Disconnect all RANGER links (except permalinks)

 11 - Disconnect a previously permanently connected link

 12 - Permanently connect specified link -- monitor only

 13 - Permanently connect specified link -- transceive

 15 - Full system status (all nodes)

 16 - Reconnect links disconnected with "disconnect all links"

 17 - MDC test (for diag purposes)

 18 - Permanently Connect specified link -- local monitor only

 200 thru 215 - (Send DTMF 0-9,*,#,A-D) (200=0, 201=1, 210=*, etc)