This Is my rpt.conf file for my Raspberry Pi Server Hosting Node

This Is my rpt.conf file for my Raspberry Pi Server Hosting Node

I needed an example

WARNING - THIS FILE WAS AUTOMATICALLY CONFIGURED FROM A
; TEMPLATE FILE IN /usr/local/etc/asterisk_tpl BY THE
; NODE-CONFIG.SH SCRIPT. ;
; EACH TIME THIS SCRIPT IS RUN, THIS FILE WILL BE OVERWRITTEN.
; IF YOU CHANGE ANYTHING IN THIS FILE AND RUN THE NODE-CONFIG.SH
; SCRIPT, IT WILL BE LOST. ;
; IF YOU INTEND TO USE THE NODE-CONFIG.SH SCRIPT, THEN YOU SHOULD
; MAKE MODIFICATIONS TO THE ACTUAL TEMPLATE FILES LOCATED IN
; /usr/local/etc/asterisk_tpl directory. ;
; Radio Repeater configuration file (for use with app_rpt) ;
; This file is shown with two local nodes. Use your editor to wholsale
; change any mention of node 28183 to your assigned node number. ;
; Likewise do the same for node 1999 if you are using a second node.
; Node 1999 is defined as a pseudo node but could be setup as a second
; simpleusb port. ;
; This file defaults to a simplex node (duplex=1) ;
; Your Repeater

https://www.qsl.net/w/w2ymm//downloads/ALLSTAR/rpt_conf_notes.pdf